Gtechniq Crystal Serum Light Ceramic Coating Kit (30ml/50ml) 5 Year Durability

GTECHNIQ CRYSTAL SERUM LIGHT CERAMIC COATING KIT

Looking to ceramic coat your car but not sure where to start?   Our 'Gtechniq Crystal Serum Light Ceramic Coating Kit' is everything you need to prep and coat your vehicle.  We'll even guide you through the process with detailed instructions (see below). 

KIT CONTENTS:
🔹1 x Gtechniq Crystal Serum Light Ceramic Coating (30ml/50ml)
🔹1 x Microfibre Coating Applicator
🔹1 x Plush Paint Cloth
🔹8 x Yellow 'Coating Take Off' Microfibres
🔹1 x Prep Spray (500ml)

INSTRUCTIONS:

• To apply Crystal Serum Light make sure your vehicle is indoors and can stay indoors for 12 hours after application, do not apply in direct sunlight
• Only apply the product at a temperature between 10°c and 25°c
• Shake well and wear gloves
• Wash and decontaminate your paintwork thoroughly prior to application. If required, polish your paintwork, either by machine or hand, to remove any imperfections
• Spray Prep Spray into a Plush Paint Cloth and wipe down each panel in small sections
• Soak the Microfibre Coating Applicator with 3 full measures of CSL from the pipette and work the liquid into the pad to get an even saturation
• Replace the lid on the bottle and set aside – do not keep the bottle in your hand as this promotes premature curing
• Apply in overlapping strokes to an area roughly 2ft by 2ft, or work to the bodylines of the vehicle
• Immediately remove residue with a Yellow 'Coating Take Off' Microfibre – you may need to buff the same area several times, but avoid doing it with too much force. We recommend the use of 2 cloths at any one time. Make sure the cloths are rotated during residue removal to prevent CSL curing in the cloth - this can make buffing residue difficult
• Inspect the surface for residue with a bright, diffused light source
• If you remove residue and it cures fully you should polish the area and reapply CSL
• Throw away Yellow 'Coating Take Off' Microfibres after coating removal
• Wait approximately 2 hours after applying CSL to apply Gtechniq Exo (if desired)
• Store in a cool, dry place
• Use within 3 months of opening